Waterbased acrylic primer for hardwood floors COSWICK F01 PRIME is a fast-setting composition based on water-acrylic dispersion.

BENEFITS:

  • Compatible with all waterbased hardwood flooring lacquers;
  • Improves adhesive characteristics decreasing the consumption of materials;
  • Fast-dry water-borne composition without solvents;
  • Odourless;
  • Non-toxic;
  • Fire- and explosion-proof.
Reference TDS Product name Category Packing Consumption Box pcs Tray pcs Manufacturing standard
4820-020000 Water-based acrylic primer for hardwood floors COSWICK F01 PRIME Protective decorative coatings 10 kg 100 — 120 g/m² when using applicator roll 2 pcs. 48 pcs. TУ BY 101040134.004-2015

 

Physical and chemical properties Color Readiness condition Shelf life Storage and transportation conditions
Density 1.1 g/cm³ White liquid Ready to use, does not need to be dissolved 12 months Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Keep away from direct sunlight and exposure to temperatures below +5°С.

 
Safety requirements:
For intended use only. Avoid contact with skin and mucous membranes. Keep out of reach of children.

Disposal:
This material and its container must be disposed of in accordance with the requirements of legislation on environmental protection and materials disposal.

DESCRIPTION
Waterbased acrylic primer for hardwood floors COSWICK F01 PRIME is used indoors as a first layer to finish the hardwood flooring, cork and plank floors from any wood species, improving adhesion characteristics and leveling the surface. To finish following layers, any Coswick lacquer, as well as waterborne hardwood flooring lacquers from other manufacturers may be used.

APPLICATION

PRELIMINARY WORKS:

Clean the surface from dust and impurities, make sure there are no spots of oil or wax to avoid finish defects. Sand the surface with an abrasive material with grit of 120 – 150. It is recommended to provide the following climatic conditions: temperature from
+18 °С to +25 °С, relative air humidity 40 – 60 %.

Important! High temperature and low humidity cut the primer drying time, while low temperature with high humidity increases it. Lowest primer application temperature is +15 °С.

APPLICATION:
Important! Shake well before use.

Primer can be applied with an applicator roll for water-based materials, brush or trowel. It is recommended to use the trowel for wide-pore wood species. Apply the primer to the surface in a uniform layer, avoiding separate primer pile-ups. When the primer is dried up, carry out preliminary sanding of the floor surface using the abrasive with grit of 150 and dispose of dust. Time to dry:
Readiness to sand/apply a new layer — 1 hour.

 

TOOLS CLEANING:
Tools are easily cleaned with water. Remains of the dry prime can be removed with acetone.

Components Description
Acrylic dispersion Water-acrylic composition of components creates an adhesion layer that levels the lacquer finish and removes roughness and small cracks.
Water