Tinted oil for restoration of oiled and hardwax-oiled hardwood floors is a composition of natural oils and waxes with the addition of micronized pigments.
BENEFITS:
- Easy to apply;
- Allows to increase the durability of the surface;
- Restores small defects and tones scratches;
- Restores the initial lustre and look of the flooring;
- Adds antistatic, soil-repellency and water-proof properties.
| Product name | TDS | Category | Packing | Consumption | Box pcs | Tray pcs | Manufacturing standard |
|---|---|---|---|---|---|---|---|
| Tinted oil for restoration of oiled and hardwax-oiled hardwood floors |  |
Local repair and renovation productsg | 0.75 L | 5 – 10 ml/m² | 9 pcs. | 432 pcs. | TУ BY 101040134.002-2014 |
COLOR PALETTE
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|
| Aqua White Art:4260-020042 |
Batiste Art:4260-020018 |
Barselona Art: 4260-020027 |
Verona Art:4260-020053 |
Rauchtopaz Art:4260-020005 |
Geneva Art:4260-020020 |
London Art:4260-020026 |
Marseille Art:4260-020028 |
 |
 |
 |
 |
 |
 |
 |
 |
| Neapolis Art:4260-020052 |
Snowdrop Art:4260-020093 |
Old Venice Art:4260-020021 |
Titanium Buff Art:4260-020031 |
Misty Fjords Art:4260-020063 |
Payne’s Grey Art:4260-020091 |
Grey Velvet Art:4260-020074 |
Grey Ash, Art:4260-020003 |
 |
 |
 |
 |
||||
| Grey Cashmere Art:4260-020051 |
Davy’s Grey Art:4260-020055 |
Spinel Grey Art:4260-020067 |
Raw Sienna Art:4260-020009 |
| Readiness condition | Time to dry | Shelf life | Storage and transportation conditions |
|---|---|---|---|
| Ready to use | For light loads (walking) — 12 hours in a well ventilated room. Time before using floors is not less than 24 hours. Maximal protective characteristics are available in a week. |
12 months | Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С. |
Safety requirements:
For intended use only. Keep out of reach of children. Wear suitable rubber gloves when using the oil. Avoid contact with mucous membranes. If underventilated, use a respiratory protection. Do not inhale oil fumes. Avoid release to the environment.
Disposal:
Dispose of the preliminary water-soaked rags with oil remains in the tightly closed container.
DESCRIPTION
Tinted oil for restoration of oiled and hardwax-oiled floors is developed specifically for restoration of the wear layer of wooden surfaces (hardwood flooring, furniture, stairs, wall panels) finished with any oil-containing finishes (natural oils, hardwax-oil, UV-oil).
The oil creates a thin oil-soaked wear and tear resistant layer on wooden surfaces. Gives a water- and soil-repellent features to the surface.
Micronized pigments from tinted oils restore the overall tone of the wooden surface while keeping the texture intact.
It is used when the hardwood flooring surface looks too “dry” (rough) or the main finish was worn off due to the heavy loads.
APPLICATION
PRELIMINARY WORKS:
 |
Clean the floor from sand, dust and litter using a vacuum-cleaner. |  |
Clean the floor with the hardwood flooring cleaner. Avoid overwatering, after the cleaning the flooring has to be dry in 2-3 minutes. |  |
It is recommended to provide the following climatic conditions: temperature from +18°С to +25°С, relative air humidity 40 – 60 %. It is necessary to ensure the good air flow during the whole application and drying process. |
MANUAL APPLICATION
Important! Shake well before use. It is recommended to test the tinted oil on a small sample of sanded wood to define the actual color.
 |
Apply the oil to the flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute the tinted oil evenly. |  |
After application, rub the oil on the surface with clean cotton rags. |  |
Remove the oil excess to avoid heavy stains and beads. |  |
Time to dry: For light loads (walking) – 12 hours, Time before using floors is not less than 24 hours. Maximal protective characteristics are available in a week. |
MECHANICAL APPLICATION
Important! Shake well before use. It is recommended to test the tinted oil on a small sample of sanded wood to define the color of the surface..
|
Apply the oil to the flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute the tinted oil evenly. | |
Remove the oil excess to avoid heavy stains and beads. |  |
After the application, rub the oil using a single-disk white pad buffing machine. | |
Time to dry: For light loads (walking) – 12 hours, Time before using floors not less than 24 hours. Maximal protective characteristics are available in a week. |
Note: Hard-to-reach places, unavailable for mechanical application (angles, joints), can be treated with cotton rags or thin brush.
FLOORING CARE:
We recommend to use the cleaner for oiled and hardwax-oiled hardwood floors.
TOOLS CLEANING:
Tools and dry oil remains can easily be cleaned with white spirit.
| Components | Description |
|---|---|
| Natural oil | Optimized composition of natural oils penetrates deeply into the pores. Once dry, the oil-treated fibre creates a durable and wear-resistant layer. |
| Pigments | Micronized pigments color the surface creating deep and saturated tone. |