Renewer oil for oiled and hardwax-oiled hardwood floors is a composition of natural oils with the addition of wax.

BENEFITS:

  • Easy to use;
  • Allows to increase durability of the surface;
  • Restores the initial look of the flooring surface;
  • Adds antistatic, soil and water resistant properties.
Reference TDS Product name Category Packing Consumption Box pcs Tray pcs Manufacturing standard
4200-020000 Renewer oil for oiled and hardwax-oiled hardwood floors Local repair and renovation products 0.75 L 5 – 10 ml/m² 9 pcs. 432 pcs. TУ BY 101040134.002-2014

 

Color Time to dry Readiness condition Shelf life Storage and transportation conditions
Gray liquid For light loads (walking) – 12 hours in a well ventilated room.
Time before using floors is not less than 24 hours.
Maximal protective characteristics are available in a week.		 Ready to use, does not need to be dissolved 12 months Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.

 

Safety requirements:
FLAMMABLE! For intended use only. Keep out of reach of children. Wear suitable rubber gloves when using the oil. Avoid contact with mucous membranes. If underventilated, use a respiratory protection. Do not inhale oil fumes. Avoid release to the environment.

Disposal:
Dispose of the preliminary water-soaked rags with oil remains in the tightly closed container.

DESCRIPTION
Renewer oil for oiled and hardwax-oiled hardwood floors is developed specifically for periodic renovation of hardwood flooring, furniture, stairs, wall panels finished with any oil-containing finishes (natural oils, hardwax-oil, UV-oil) and restoration of protective properties.

The oil creates a thin oil-soaked wear and tear resistant film on wooden surfaces. It gives a water- and soil-resistant features to the surface.

The renewer oil is used when the hardwood flooring surface looks too “dry” (rough) or a main finish was worn off due to the heavy loads.

Periods of renovation depend on type of the facility and its’ loads:

Room type Finish type
UV-Oil Hardwax-oil
Living rooms Once in 3-5 years Once in 1-2 years
Public places Low and average loads Once in 3-6 months Once in 1-2 months
Heavy loads Once in 1-2 months Once in 2 – 3 weeks

 

APPLICATION

PRELIMINARY WORKS:

Clean the floor from dust and litter using a vacuum-cleaner. Clean the floor with the hardwood flooring cleaner. Avoid overwatering, after the cleaning the flooring has to be dry in 2-3 minutes. It is recommended to provide the following climatic conditions: temperature +18°С to +25°С, relative air humidity 40 – 60 %. It is necessary to ensure a good air flow during the whole application and drying process.

 

MANUAL APPLICATION
Important! Shake well before use.

Apply the oil to a renovated flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute evenly. When applied, rub the oil with clean, non-colored rags, remove the oil excess to avoid heavy stains and beads. Time to dry:
For light loads (walking) – 12 hours,
Time before using floors is not less than 24 hours.
Maximal protective characteristics are available in a week.

 

AUTOMATIC APPLICATION
Important! Shake well before use.

Apply the oil to a renovated flooring surface with a resin trowel, a brush with rough bristles or a simple brush. Distribute evenly. After the application, rub the oil using a single-disk white pad buffing machine. Time to dry:
For light loads (walking) – 12 hours,
Time before using floors is not less than 24 hours.
Maximal protective characteristics are available in a week.

 

FLOORING CARE:
We recommend to use Coswick cleaner for oiled and hardwax-oiled hardwood floors.

TOOLS CLEANING:
Tools and dry oil remains can easily be cleaned with white spirit.

Components Description
Natural oils Oil deeply penetrates the wood fibre. Once dry, the oil-treated fibre creates a durable and wear-resistant layer. Due to its natural characteristics, the oil steeps the wood keeping the pores open and allowing the wood breathing.