Primer concentrate Coswick F00 Prime is an eco-friendly water-polymeric dispersion for mineral porous surfaces with special antiseptic and antifungi additives.
Primer is used for indoor and outdoor works.

BENEFITS:

  • Increases adhesion strength of a surface with adhesives and finishing products (adhesives, paints, wallpapers, etc.);
  • Smoothens an absorbing surface of the base layer improving the quality of a finish;
  • Reinforces a base layer;
  • Contains antiseptic additives against mold and fungy
  • Does not contain solvents;
  • Fire- and explosion- proof.
Reference TDS Product name Category Packing Consumption of the ready-to-use primer Box pcs Tray pcs Manufacturing standard
4780-030000 Primer concentrate Coswick F00 Prime Materials for glue-down hardwood flooring installation 5.0 kg 120 – 280 g/m2, one layer 6 pcs. 144 pcs. СТБ 1263-2001
4790-030000 10.0 kg 3 pcs. 80 pcs.

 

Physical and chemical properties Color Readiness condition Time to dry Shelf life Storage and transportation conditions
рН from 6.5 to 9.5 Milky color liquid To dilute at the ratio of 1:3 Time to dry for a single layer – 1 – 2 hours at the temperature of 20 °C 12 months Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.

 
Safety requirements:
For intended use only. Avoid contact with skin and mucous membranes. Keep out of reach of children.
Primer is non-toxic, fire- and explosion- proof.

Disposal:
This material and its container must be disposed of in accordance with the requirements of legislation on environmental protection and materials disposal.

DESCRIPTION
Primer concentrate Coswick F00 PRIME is used to dedust and fortify porous mineral surfaces (concrete, plaster, brick, plasterboard etc.) and wooden surfaces. It is recommended to apply the primer to the base before gluing-down hardwood floor planks, along with ceramic tiles installation, fixing heat insulating slabs, papering walls and painting.

Primer concentrate Coswick F00 Prime provides:

  • reinforcement of the base top layer;
  • increased adhesion between surfaces and decrease in consumption of some materials (adhesives, paint, plaster, wallpapers, etc.);
  • protection of the surface from impact of fungi and mold. This is particularly important when finishing walls and floors.

APPLICATION

Important! Before use, dilute the primer concentrate in 1:3 ratio.

Remove old coatings (paint, wallpapers, dirt, oil and other impurities) from the surface (walls, floor, etc.) if any. Apply the primer with a brush, applicator roll or a spray gun over the base layer in conditions of air temperature between +5°С and +30°С. Loose surfaces shall be primed twice within at least 2 hours. Time to dry: 1 — 2 hours at the air temperature of +20 °С.

 
TOOLS CLEANING:
Tools are easily cleaned with water.

Components Description
Acrylic dispersion A water-acrylic system of components penetrates deeply into the base layer pores and, when dried up, creates the matrix that acts as an adhesion frame that holds the particles of the base surface.
Water