Polyurethane primer Coswick F02 Prime is a waterless PU-resin based compound.

BENEFITS:

  • Reinforces base layer;
  • Does not contain water and solvents;
  • Increases adhesion to the floor and decreases adhesive consumption;
  • Can be used over underfloor heating systems.
Reference TDS Product name Category Packing Consumption Box pcs Tray pcs Manufacturing standard
4110-030000 Polyurethane primer Coswick F02 PRIME Materials for glue-down hardwood flooring installation 6.0 kg 100 — 150 g/m2 for one layer 6 pcs. 144 pcs. СТБ 1263-2001
4120-030000 12.0 kg 3 pcs. 80 pcs.

 

Physical and chemical properties Color Readiness condition Time to dry Shelf life Storage and transportation conditions
Density 1.4 g/cm3 Brown liquid Ready to use 2 hours at the temperature of +20°C 12 months Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.

 
Safety requirements:
For intended use only. Avoid contact with skin and mucous membranes. Keep out of reach of children.

Disposal:
This material and its container must be disposed of in accordance with the requirements of legislation on environmental protection and materials disposal.

DESCRIPTION
Primer is designed to fortify porous mineral surfaces (concrete, cement, particle and OSB boards, calcium-sulphate and xylolite screeds) when installing hardwood flooring with any type of adhesives.

APPLICATION

Remove old finishes (paint, wallpapers, dirt, etc.) if any. Apply the primer with a brush, applicator roll or a spray gun over the base layer in conditions of air temperature between +5°С and +30°С. Loose surfaces shall be primed twice within at least 2 hours. Time to dry: 2 hours for one layer at the air temperature of +20 °С.

Important! Flooring has to be glued down not later than 48 hours after priming.

TOOLS CLEANING:
Tools are easily cleaned with acetone.

Components Description
Modified polyurethane prepolymer Waterless. The primer is an air-dry mix that reinforces the base and creates a solid and firm surface for the hardwood flooring installation.