Hardwax-oil for hardwood flooring finish is a mixture of penetrating and strengthening natural oils, waxes and functional additives.

BENEFITS:

  • Easy to use;
  • Improves finish durability;
  • High chemical resistance to domestic pollutants;
  • Adds antistatic, soil-repellent and water-proof properties;
  • Keeps the natural look of the wood and adds luster.
Reference TDS Product name Category Packing Consumption Box pcs Tray pcs Manufacturing standard
4060-020000 Hardwax-oil for hardwood flooring finish Protective decorative coatings 0.75 L 15 – 30 ml/m² for the first layer,
10 – 20 ml/m² for the second layer		 9 pcs. 432 pcs. TУ BY 101040134.002-2014
4070-020000 3.0 L 140 pcs.
4080-020000 5.0 L 84 pcs.

 

Color Readiness condition Time to dry Shelf life Storage and transportation conditions
Gray oily liquid Ready to use First layer — 4 — 6 hours.
Second finish layer — minimum 12 hours		 12 months Keep tightly closed at temperature +5°С to +25°С. Keep container dry. Avoid direct sunlight and exposure to temperatures below +5°С.

 
Safety requirements:
FLAMMABLE! For intended use only. Avoid contact with skin and mucous membranes. To prevent the spontaneous combustion, keep the oil-soaked rags in tightly closed metal containers or under the water. Keep out of reach of children.

Disposal:
This material and its container must be disposed of in accordance with the requirements of legislation on environmental protection and materials disposal.

DESCRIPTION
Hardwax-oil for hardwood flooring finish is used for protective-decorative finish of hardwood, cork and plank flooring in living rooms and public premises, furniture and other wooden items.

Oil deeply penetrates the wood fibre. Once dry, the oil-treated fibre creates a durable and wear-resistant layer. Due to its natural characteristics, oil steeps the wood keeping the pores open and allowing wood to breathe.

APPLICATION

PRELIMINARY WORKS:

Sand the surface with an abrasive material with grit of 150 — 180. Clean the floor from dust and litter using a vacuum-cleaner. It is recommended to provide the following climatic conditions: temperature from +18°С to +25°С, relative air humidity 40 – 60 %. It is necessary to ensure the good air flow during the whole application and drying process.

 

MANUAL APPLICATION
Important! Shake well before use.

Apply the hardwax-oil with a metal trowel distributing it evenly on the surface. After the application rub the hardwax-oil with rags on the surface removing the excess. When the first layer is dried out, apply the second layer of the hardwax-oil in the same way. Time to dry:
First layer — 4 — 6 hours.
Second layer — minimum 12 hours.

 

MECHANICAL APPLICATION
Important! Shake well before use.

Apply the hardwax-oil with a metal trowel distributing it evenly on the surface. Remove the hardwax-oil excess with cotton rags. Rub the hardwax-oil with a single-disk white pad buffing machine. When the first layer is dried out, apply the second layer of the hardwax-oil in the same way. Hard-to-reach places, unavailable for mechanical application (angles, joints), can be treated with cotton rugs or thin brush. Time to dry:
First layer — 4 — 6 hours.
Second layer — minimum 12 hours.

 

FLOORING CARE:
We recommend to use Coswick cleaner for oiled and hardwax-oiled hardwood floors.

TOOLS CLEANING:
Tools and dry oil remains can easily be cleaned with white spirit.

Components Description
Natural oil The optimized mixture of natural oils penetrates into the wooden pores, and natural wax creates a wearproof layer on the surface. Together these two components create soft and silky finish on the hardwood flooring surface.
Waxes